File(s) | Type | Description | Action |
---|---|---|---|
NEP1999.csv (43.76 MB) | Comma Separated Values (.csv) | Primary data file for dataset ID 2505 | Download |
Physcial data from GLOBEC Georges Bank Long-term Moored Array Component on the Northeast Peak, Mar-Aug 1999.
One deployment was made in 1999 at this site, Mar 12. 1999 to Aug 14 1999. (Dates reflect dates of data not deployment time)
Note: Sampling rates vary from instrument to instrument. Data Submitted by: Jim Irish Woods Hole Oceanographic Institution Woods Hole, MA 02543 phone: 508 289 2732 fax: 508 457 2195 e-mail: jirish@whoi.edu 1. The nominal position of the mooring is the designed deployment site and actual deployments varied by about 0.5 nm around this position. 2. Sensor depths are nominal designed depths. In water sensors vary around this designed depth by about 1 m, variation larger at greater distance below buoy. 3. Temperatures are listed in the IPTS68 standard, rather than IPT90. 4. Salinity conversion from conductivity was done with PSS78 5. Sensor normalization was done with pre-cruise calibrations, and checked with post-cruise calibrations. 6. Only minor editing has been done to remove spikes from records. 7. No corrections have been made to fluorometer and transmissometer data to remove biological fouling induced drift. 8. No corrections have been made to salinity for drifts due to biological fouling. updated 08/10/05; gfh
Beardsley, R., Irish, J. (2010) Physcial data from GLOBEC Georges Bank Long-term Moored Array Component on the Northeast Peak, Mar-Aug 1999. Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2010-01-01 [if applicable, indicate subset used]. doi:10.1575/1912/bco-dmo.2505.1 [access date]
Terms of Use
This dataset is licensed under Creative Commons Attribution 4.0.
If you wish to use this dataset, it is highly recommended that you contact the original principal investigators (PI). Should the relevant PI be unavailable, please contact BCO-DMO (info@bco-dmo.org) for additional guidance. For general guidance please see the BCO-DMO Terms of Use document.