File(s) | Type | Description | Action |
---|---|---|---|
881127_v1_palmer_station_sediment_trap.csv (3.80 KB) | Comma Separated Values (.csv) | Primary data file for dataset ID 881127, version 1 | Download |
Sinking organic carbon, nitrogen, and Th-234 fluxes measured using bottom-tethered, VERTEX-style sediment traps during the 2012-2013 field season of the Palmer LTER program near Anvers Island in the Western Antarctic Peninsula. These flux measurements allow investigation of the ocean’s biological carbon pump. Sediment trap deployments span the ice-free season near Anvers Island. Deployments lasted between 2 and 8 days, depending on ocean conditions.
Data comes from VERTEX-style, bottom-tethered (moored) sediment trap deployments. Particle interceptor tubes were deployed on cross-pieces with 4 tubes attached at a depth of 50 m. Tubes were deployed with a dense formaldehyde brine created by adding NaCl and formaldehyde to filtered seawater. After recovery, overlying seawater was removed from each tube by gentle suction. Tubes were then gravity filtered through a 200-micron nitex mesh filter, and the 200-micron filters were carefully analyzed under a stereomicroscope and all metazoan zooplankton “swimmers” were removed from the sample. Filtrate and remaining material on the 200-micron filter were then each filtered through separate pre-combusted quartz (QMA) filter. Samples were then dried, mounted in RISO planchets and counted on a RISO low-level beta multi-counter. After subsequent background counts, samples were acidified to remove calcium carbonate and analyzed for carbon and nitrogen on an elemental analyzer.
Stukel, M. (2024) Particulate organic carbon, nitrogen, and Thorium-234 measurements collected during the 2012-2013 Palmer Field Season (WAP Carbon export project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2022-08-02 [if applicable, indicate subset used]. doi:10.26008/1912/bco-dmo.881127.1 [access date]
Terms of Use
This dataset is licensed under Creative Commons Attribution 4.0.
If you wish to use this dataset, it is highly recommended that you contact the original principal investigators (PI). Should the relevant PI be unavailable, please contact BCO-DMO (info@bco-dmo.org) for additional guidance. For general guidance please see the BCO-DMO Terms of Use document.